Payment & Shipping Terms:
|Test Standard:||BS476-6||Usage:||Fire Propagation Index Test|
|Test Object:||Wall,ceiling,lamination Etc||Color:||White|
|Operation:||PC Controlled||Warranty:||1 Year|
|Keyward:||Fire Propogation Index Test Apparatus||Conditon:||New|
smoke density test apparatus,
fire test chamber
BS476 Part 6 Fire Propagation Index Test Apparatus for Walls and Ceilings
Data Acquisition system:
BS476-6 appratus is designed with prompted software interface
This test equipment can record data and display cowl temperature against time
Fire propagation index tester can also record data and display ambient temperature against time
Display of power value in kW
Calculation of output rise and calibration value
Stainless steel support frame andCalcium silicate board combustion chamber.
Three kinds of sample holders for different thickness of the specimens.
Low reflective black finished mild steel Chimney and Cowl assembly complete with thermocouple mounting points.
Compliant stainless steel gas burner.
Two K type mineral insulated thermocouples complete with ceramic insulators.
Two pencil type heaters with 1000w installed in combustion chamber.
Control gas instrumentation including electronic gas on/off valve, flow regulating valve, flow meter and manometer.
Intelligent single phase power controller with feedback loop for accurate control of electric heating elements
DAQ record automatically the mV output from the thermocouples of the flue gases throughout the duration of the test.
According to the test time, BS476-6 test apparatus can automatically adjust the output power.
Installation requirements of BS476-6 Fire Propagation Index Test Apparatus
|1||Electrical||230 volts Nominal 10 Amps|
|2||Ambient Temperature||Operating 10°C to 35°C|
|3||Gas Supplies||The gas supply specified in the Standard is Standard test gas G112, as specified in BS 4947.|
|4||Flow||Gas flow for burner adjustable from 0 to 5 nl/min|
Contact Person: Jackson Sun