5000N Single Arm Computer Servo Tensile Strength Testing Machine ISO10319 & ISO12236
Description:
This tensile machine can do various tensile testing in the field of rubber, leather products, plastics, chipboards, foam, plastic, film, flexible packaging, pipes, textiles, geotextile and geosynthetics products, fibers, nanomaterial, polymers, composite materials, synthetic materials, packaging, paper, wire and cable, fiber optic cable, wire cables, seat belt, seat belt, leather belt, shoes, tape, polymer, copper, spring steel wire, stainless steel, castings, brass, non-ferrous metals, car parts, alloys and other non-metallicmaterials and metallic materials tensile, compression, bending, tearing, and 90 ° peel, 180 ° peel, shear adhesion, pull-out strength, an extension of the elongation test.
Use Multi-threaded parallel processing make the software can display “Force-Displacement”, “Force-Time” , “Displacement-Time” and “Stress-Strain” curves simultaneously, so you can switch to any graph which you want to see and check the user settings.
Opening testing results edit method make user get any wanted test data. Up to 400 (such as maximum force,minimum force,fracture force,peel strength,tensile strength,shear strength,tear strength,maximum deformation,yield strength,elongation,elastic modulus,ring stiffness,non-proportional elongation,minimum force range,average force range and elongation under constant force) can be called by user.
Standards:
BS EN ISO 10319,BS EN ISO 12236 CBR Puncture Resistance
Standard accessories:
BS EN ISO 10319 Tensile strength fixtures 1 set,BS EN ISO 12236 plunger, clamping system
Computer test software 1 set,
English manual book 1 pcs.
Specification:
|
Capacity
|
500KG (5000N)
|
|
Effective load range
|
0.4％～100％
|
|
Load accuracy
|
±0.5％ of value
|
|
Display
|
Computer Test Software
|
|
Units
|
Kg,lb,N
|
|
Data sampling frequency
|
200times/sec
|
|
Load solution
|
1/±250000 of max load
|
|
Load sensor
|
Pull and press sensor(max load)
|
|
Effective test width
|
150mm
|
|
Effective stroke
|
500mm
|
|
Test speed
|
50-500mm/min
|
|
Displacement accuracy
|
±0.5％
|
|
Returning function
|
Manual or automatic two option, after test the up fixture will return to the initial position
|
|
Safety device
|
Electronic process for limit procession
|
|
Overload protection
|
If 10％ over than max load,machine will automatic stop for protection
|
|
Result print
|
Outside printer that connect to computer
|
|
Grip
|
Tensile fixture 1 set
|
|
Machine Size
|
420×350×1520mm
|
|
Machine weight
|
Approx. 50 Kg
|
|
Power
|
220V±10% 0.2KW/0.4KW
|
Net weight: 75KG, Gross weight: 95KG; Plywood box size: 50*45*160cm
Accessories:
Grips:
1) Tensile strength Test
2) Tear strength Test
3) Resistance to seam slippage Test:
BS EN ISO 10319 clamping system BS EN ISO 12236 clamping system
Clamp for extensometer:
Software operation guide manual:
Your message must be between 20-3,000 characters!
