DONGGUAN YUYANG INSTRUMENT CO.,LTD
China Good Quality Manufacturer of Testing Equipment
|Place of Origin:||China|
|Certification:||GB/T 5169.5, GB/T 4706.1, IEC60695-11-5, IEC60695-2-2|
|Minimum Order Quantity:||1 set|
|Packaging Details:||Plywood Box|
|Delivery Time:||10 work days|
|Payment Terms:||T/T, L/C, Western Union|
|Supply Ability:||5 sets per month|
|Product Name:||Flammability Testing Equipment||Usage:||Needle Flame Test|
|Material:||Stainless Steel||Burner Needle Diameter:||Φ0.5 ± 0.1mm|
|Test Chamber:||0.5 Cubic Meters||Flame Temperature Measurement:||100 ℃ ± 2 ℃ To 700 ℃ ± 3 ℃|
flame test equipment,
flammability test apparatus
IEC60695-11-5 Durable Flammability Test Chamber , Needle Flame Tester For IEC60695-2-2
Faults in the product such as fault currents flowing through the leakage path, overheating of components or parts, poor contact, etc. may cause a flame, which may then be directed to nearby parts.
The needle flame test simulates the internal part of the product. A small flame is generated under fault conditions and the risk of ignition is assessed using simulation techniques. For small parts (or components) Glow-wire test or horizontal-vertical combustion test method is not suitable, can be cited needle flame test method. If the test sample is ignited during the glow-wire test, the resulting combustion hazard is subject to a needle-flame test. Needle flame tester for electrical and electronic products, household appliances parts, components and components, such as:
wiring board, centrifugal switch, rice cooker socket ... ....
GB / T5169.5, GB / T 4706.1
Function and technical index:
The flame of the test is made of bottled butane gas.
The needle of the burner needle has the diameter Φ0.5 ± 0.1mm, the outside diameter is no more than Ø0.9mm and the length is more than 35mm. Adjustable 12 ± 1mm, according to the standard requirements transferred to a height measuring instruments. Flame temperature measurement from 100 ℃ ± 2 ℃ to 700 ℃ ± 3 ℃ time in 23.5s ± 1.0s within. (Tb)
inner hole diameter Φ 0.5mm ± 0.1mm, Diameter,9mm≤Φ,
length ≥ 35mm, stainless steel
|Burner angle||0°, 20°, 45° (adjust flame height)|
Ø0.5mm Type K (Ni/Cr - Ni/Al), armored sheath can withstand
Temperature -40°C~ 1100°C
|Burning time||0-999.9 s ± 0.1 s adjustable (usually selected for 30s)|
|Hold Burning time||0-999.9 s ± 0.1 s, automatic recording, manual time-out|
|Flame Height||12mm ± 1mm (with height measurement instruments)|
|Flame Gas||butane gas/Butane gas, min. 95% purity (can use bottled lighter gases)|
|Temperature Test Range||0~1000°C|
|Flame Temperature Requirement||from 100 °C ± 2 °C liters to 700 °C ± 3 °C time in 23.5 seconds ± 1 seconds|
|Standard Copper Block||4mm±0.01mm, weight.0.58g±0.01g before drilling. Cu-ETP|
|Test process||Automatic control, independent convulsions|
|Consult standard||GB/T5169.10-2006 , IEC60695-11-5:2000,UL746A|
|Power Supply||800VA ,220V, 48-60Hz|
Combustion tank and the main mechanical part of the stainless steel, manufacturing stress, resistance to smoke, gas corrosion.
The flame can be used in the range of 0 to 99 minutes and 99 seconds, automatic control, record the burning duration.
Key components using imported parts, digital time, fixture three-dimensional adjustable, control system automation, independent ventilation, observation and easy to use, stable and reliable.
Test chamber: 0.5 cubic meters.
Contact Person: Jackson Sun