DONGGUAN YUYANG INSTRUMENT CO.,LTD
China Good Quality Manufacturer of Testing Equipment
|Place of Origin:||China|
|Minimum Order Quantity:||1|
|Packaging Details:||wooden case|
|Delivery Time:||10-15 days|
|Payment Terms:||L/C, D/A, D/P, T/T, Western Union, MoneyGram|
|U Manometer::||1M||Pressure Gauge::||0-160kPa|
|Power Supply::||AC220V, 50HZ||Total Power::||200W|
|Burn Off Time::||It Can Be Set||Spraying Time::||It Can Be Set|
W1200mm Flammability Testing Equipment,
LED Lamp Flammability Testing Equipment,
Anti Smoke Flammability Testing Equipment
UL1581 Anti Smoke LED Lamp W1200mm Flammability Testing Equipment
The equipment is composed of test part and control part and adopts integrated design, which is convenient for field installation and commissioning.The control system is highly automated and has the function of automatic ignition.Real-time display of temperature and time, convenient observation and recording, stable and reliable use.
The back of the chamber body is equipped with a strong exhaust air exhaust system. After the test is completed, it is opened at the same time with air supply system to discharge waste gas to outside in time. The front of the chamber body is equipped with sealed toughened glass window and operation window, which is convenient for the observation of test process and operation of experimenter.
Main Technical Parameters:
1. The machine is composed of combustion chamber and control part.
2. Test chamber: the volume is greater than 4m.The area above the test flame is greater than 2.0m;The chamber consists of a frame inside and outside Coating thickness of 1.5mm electrostatic high-temperature paint steel plate, CNC machine tool processing and molding, external spray treatment, internal paint.There are two layers of paint, one for anti-rust paint, two for production of black matte paint, with anti-rust corrosion and other characteristics.
3. The back of chamber is provided with a ventilation and smoke exhaust system, and forced exhaust is used.The exhaust gas can be discharged to outdoor after the test is completed.
4. Operating equipment: There is an operating window below the observation window, with a length of about 600mm corrosion-resistant long arm gloves, square then seal operation.
5. Lighting equipment: Adopt an anti-fog and anti-smoke LED lamp
6. Spraying time: it can be set
7. Burn off time: it can be set
8.The number of flame: setting
9. The device has the functions of automatic ignition, automatic timing and counting, with high test accuracy
10. U manometer: 1M
11. Pressure gauge: 0-160kPa
12. Power supply: AC220V, 50HZ
13. Total power: 200W
14. External dimension of equipment: L1800mm*W1200mm*H2000mm (excluding dimensions of exhaust outlet and casters)
|Spraying time:||it can be set|
|Burn off time:||it can be set|
|The number of flame:||setting|
|Power supply:||AC220V, 50HZ|
1.Sample preparation for FT1 combustion test:
One sample, about 455mm long, is taken from the finished wire and cable or flexible cord.
2. Operation method of FT1 combustion test:
2.1. Prepare samples and handle them according to the relevant provisions in the above "Sample Preparation".
2.2 Open the door of test chamber, clamp both ends of sample into the upper and lower fixtures respectively and fix them.Move the flame spread limit indicator and flame spread start indicator to the appropriate position.Access gas, access air.
2.3 Power on and turn on the power switch.Turn on "Light" on the touch screen and turn on lighting.Press the "Move fire NOZZLE" on touch screen. Tilt the nozzle 70° and place it (as shown below). Then install a flame nozzle (Long:40mm). Move the nozzle assembly appropriately and compare it to nozzle to determine the nozzle's test position.(Note: Once the position of blowtorch is determined, it does not need to be adjusted)
2.4 After the nozzle is adjusted, remove flame nozzle and press the "Move fire NOZZLE" on touch screen. Place the nozzle perpendicular to 90°.
Product details display:
Contact Person: Seline Yu