Laboratory Smoke Density Tester For Industrial Material Noxious Gas Analysis

Laboratory Smoke Density Tester for Industrial Material Noxious Gas Analysis

Introduction:

The smoke toxicity test apparatus of the material is heated by heating to release harmful gas and then observe the reaction of the mice to carry out the test. This test is mainly based on the relevant standards and used in building materials, textile fabrics, transportation tools, interior materials, wire and cable and other industries.

Standard:

GB/T 20285-2006
DIN 53436
JIS A1321

Characteristic:

1. Advanced industrial appearance and control design.
2. Automation degree is high, the test process is safe and reliable, and the operation is convenient.
3. Closed box design, the experimental process can be collected from the exhaust gas generated and concentrated emissions.
4. Integrated design, embedded 19 inch screen and computer
5. Mold forming refractory furnace, high reliability, long service life.
6. Video system can monitor the state of all experimental mice, and can record and save video files.
7. Ring electric heating furnace heating, the use of temperature up to 1000 degrees C.
8. Gas sampling interface.
9. Imported high precision flowmeter.
10. PC+Labview professional software control.
11. Precise temperature control, temperature error of 1 degrees or less.
12. Built-in test, calibration program module.
13. Computer control ring furnace and round trip.
14. Temperature parameter setting and display.
15. Experimental data acquisition and preservation.
16. Mouse motion picture monitoring, real-time temperature curve display.
17. Can directly output test report and query the historical data.
18. Laboratory animals required: GB 14922.1 and GB 14922.2 requirements of the clean level experimental mice.
Must be obtained from the unit of the experimental animal production license; genetic classification in accordance with the GB 14923 of the near cross
System or closed group requirements.

Specifications:

1. Device size: 2400 (W) * 700 (D) * 1800 (H) mm.
2. Power Supply: 220V 16A AC.
3. Weight of about 180kg.
4. Air supply compressed air.